Mike Harman's Journal

Well I finished getting the doors and the front guards ready for the painter today.
It took me about one week on each side after sanding back most of the time was taken in waiting at least two hours between applying body filler and then sanding once i thought thatit was right I applied a thin coat of primer then block sanded the panels with a long block iThey all looked pretty good becuse of the curve in the panels I then used a long thin stick to check that there was no hollows. as I had only applied a very thin layer of filler where thepanels were a bit hollow from the factory and it was to repalce the original factory filler. Off to the paint shop at the end of next week