Member Page: David Cutter
 |
David CutterMember ID: davecutter
Status: Gold Member  Sandusky, OH, USA 
Last Login: 2026-03-11 11:49
Forum Posts: 0 |
Upcoming Events
Personal Vehicle Registry
Recent Activity Feed
No recent activity on Vintage Race Forum.
Member Journal – 1963 TR4 - Angus
There are 22 total entries in this Journal.
Battery Bracket Fabrication.
Posted on: Saturday June 3, 2017
The battery hold-down bracket was long gone in Alfie, so I decided to weld one up. Wanted to keep the threaded portion and fasteners below the top of the battery.
PCA Driver Skills Day At Bremerton
Posted on: Wednesday June 14, 2017
The Pacific NW Porsche Club of America put on a great session on Sunday. Angus performed admirably and we all learned a bit about our cars and ourselves!
Sway Bar Linkage Refresh
Posted on: Sunday June 4, 2017
So, the best I can tell is that the linkage has three requirements. Linear rigidity, to reduce roll/sway. Angular flexibility. Noise and wear reduction. There clearly is a bending moment in the linkage as shown by the too-long grade 5 bolts. Had some grade 8 bolts and shock bushings in the parts bin, so I got rid of the wood. Need to pick up a bit longer bolt. Separate discussion on this here: http://www.triumphexp.com/phorum/read.php?7,1461805,1461805#msg-1461805
Fuel Tank Repair With JB Weld
Posted on: Saturday June 3, 2017
As expected most shops won't touch fuel tank work due to either environmental or liability concerns. Found one place, but it was very pricey. Staying true to my goal for this summer, I want to keep driving it daily and hold the "down" periods to less than 48 hours. Decided to try a little modern chemistry and see if it would get me through the driving season. Will decide on a long term fix this winter during the rebuild. After 24 hours the JB Weld seam is leak-free. Was able to put a...
... and 18 more posts.
Vintage Race Forum Library Articles
No tech articles written by this member.
